Garmin
Garmin Dual Beam Transducer (8-pin Connector) 010-10249-40
Garmin Dual Beam Transducer (8-pin Connector) 010-10249-40
Thorne Bros - 10091 Central Ave. - PH# 763.572.3782
10091 Central Ave NE
Blaine MN 55434
United States
Thorne Bros. Marine Electronics - 10130 Davenport St NE Suite 160 - PH# 763.572.3782
10130 Davenport St NE
Suite 160
Blaine MN 55449
United States
Choose options
This dual beam transducer replaces the one included with your echo™ series fishfinder.
A 500 W 8-pin transducer, it has an operating frequency of 77/200 kHz; a beamwidth of 45/15 degrees; and mounts on a 0 to 70 degree transom.
Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
When using with the echo fishfinders, transducer adapter cable, 010-11947-00, is required. Transducer, 010-10249-20, is preferred.
| Transducer frequency | 77/200 kHz |
|---|---|
| Transducer power | 500 W |
| Transducer beamwidth | 45°/15° |
| Transducer maximum depth | 1,900 ft. |
| Transducer cable length | 30 ft. |
| Transducer depth/speed/temperature | Depth and Temperature |
| Transducer number of pins | 8-pin |
| Transducer supported deadrise/transom angles | 0°-70° degree transom |
⚠️ WARNING: Risk of cancer and reproductive harm from exposure to Lead and lead compounds. See www.P65Warnings.ca.gov.
⚠️ WARNING: Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl)phthalate (DEHP). See www.P65Warnings.ca.gov.
Important Notice – Jigs and Sinkers
- The sale of this item may be restricted in Maine (ME), New Hampshire (NH), Vermont (VT), and New York (NY).
- Please check your local laws and regulations before ordering or using this product.
- Thorne Bros is not responsible for orders placed in violation of state restrictions.