Cisco Sure Stop Track

Cisco Sure Stop Track

Cisco Sure-Stop track is truly the finest track available on the market. Every piece is anodized to military specs and is designed to help make using a track system on your boat as effortless, safe, convenient and inexpensive as possible.  Special features that hold our standards of track higher than our competitors are listed below.

Easy Access Incline: 

Every piece of the Cisco track comes standard with an easy access incline on the open edges of the track.  This incline has been machined into the aluminum to assist you when sliding track mounts and other accessories into the track. While other track manufactures simply saw their track to length this can leave sharp edges which create drag when putting your rod holders and other accessories into the track.  At Cisco, we machine the track to length and remove any sharp edges so that the mounts simply glide into position without resistance.

End Stops and Mounting Features:

Our track was engineered so that users could get the most out of the product at the best price possible; that is why every piece of track comes standard with end stops at each corner of track.  This  1/4-20 threaded end stop is also capable of accepting thumbscrews so nothing can slide outward from the track while running the boat, yet be easily removed at the dock.  The track is also slightly thicker at the base than other brands to help disperse pressure on the gunnel of the boat when mounted.  Industrial grade stainless steel mounting hardware is provided. 

***All track units up to 24” are capable to be attached to any of our Multi-Mounts.  These will only have our 2-1/4" x 1-1/2" Rectangular Hole Pattern with Countersunk Holes in the middle of the track.***

Safety Aspects: 

Another feature which sets us apart from our competitors is the process each track goes through to make certain that no edge or corner on the track is left unrounded.  We machine a radius on every edge of the exposed track.  This is extremely important to us to guarantee the safety of the friends and family while boating.  Each piece of track is personally handled and inspected before being sold to our customers.  You no longer have to worry about someone putting their hand on the track in rough waters for support and getting hurt in the process.

Center Cut-Out Option: 

Our 60", 72" and 83" Tracks have a center cut-out option available.  This is a 6" wide section of the track that is machined out of the inboard side of the track.  It allows you easy access to slide in additional equipment without having to move equipment in/out from the sides of the track only.  The center cut-out option does allows end stops to be used if desired.

*Tracks are compatible with equipment from brands such as Bert's, Cannon, and any other brands offering 3" x 1/4" channels.